Gluing stone to a fireplace requires care and the right materials. You will learn how to properly glue stone to a fireplace in the article below.
If you want to lay stone on a fireplace efficiently and correctly, you will need two building materials. The first is decorative stone for fireplaces. A good quality adhesive for natural stone will enable you to mount it on the surface. Products such as adhesive for fireplace stones and other building materials can be found in the Vitcas store. Before laying stones on a fireplace, you must thoroughly clean the surface of dust, grease and other contaminants. The surface of the fireplace walls should be levelled with mortar and then primed. Then it is time for the decorative stone for the fireplace. To fix it in place, you will need high-temperature adhesive for natural stone. Apply it evenly to the back of the stone slab with a notched trowel, and then press the slab firmly against the surface of the fireplace with that side.
What adhesives are best for natural stone on a fireplace?
Which adhesive should you choose for natural stone? Vitcas BA fireplace tile adhesive is the best choice, as it can withstand temperatures of up to 1350°C. It is a ready-to-use product. Also recommended is Vitcas HB60 fire-resistant adhesive for natural stone, which can withstand temperatures of up to 750°C and has an extended setting time, allowing all the glued elements of the fireplace structure to be adjusted. As can be seen from the above information, it is essential that adhesive for fireplace stone is resistant to high temperatures. At the same time, it must be flexible so that it can compensate for the thermal expansion of the materials it bonds.
Installation instructions: step by step
The installation of stone for fireplaces requires proper surface preparation and the use of durable materials. Before starting work, the surface must be thoroughly cleaned and primed to ensure optimum adhesion. The key element is the choice of adhesive for natural stone, which must be resistant to high temperatures and flexible to compensate for the thermal expansion of the materials. Which adhesive for fireplace stone should you choose? Fire-resistant adhesives such as Vitcas BA, which can withstand temperatures of up to 1350°C, or Vitcas HB60, which allows for precise fitting of elements, work best. After applying the adhesive, press the stone slab firmly and leave it to set. If you are looking for proven products, visit the Vitcas store.
Worth reading:
High-temperature adhesives for fireplaces – what you need to know
How do I choose marble adhesive for a fireplace?
If you don’t know which adhesive to choose for natural stone, seek advice from specialists. You can also entrust them with the construction of your dream fireplace, confident that they will do it professionally and in a short time.